TENFIL Sealant paste in aqueous dispersion TENFIL TF200 is a PTFE-based thread sealant in water dispersion, which increases the tightness of the threaded parts and prevents leakage of water. TF200 can be used at temperatures from -45 ° C to + 150 ° C (-49 ° F to + 302 ° F). The product is intended for the assembly of fittings and threaded joints of different kinds of pipes.

SPECIAL PROPERTIES

• Cold usage.
• Good resistance to ALCOHLS, ALIPHATIC SOLVENTS, GLYCOLS, OILS, GREASES.
• Moderate resistance to AROMATIC SOLVENTS, ESTESR, KETONES.

TECHNICAL INFORMATION

Properties			Value
	APPEARANCE		White paste
	SOLID CONTENT		50 – 55%
	pH		4 – 6
	VISCOSITY		12000 +/- 1000 cP (metodo Brookfield)
	DENSITY		1,07-1,08 gr/cm3 @ 20°C
	SURFACE TENSION		38 dyn/cm
	FLASH POINT		Not applicable
	BOILING POINT		100°C (212°F)
	STIFFNESS POINT		About 0°C
	COMPOSITION		PTFE-based aqueous dispersion

 

DRYNG TIME

	TEMPERATURE °C		FORCED AIR m3/min		DRYING TIME		END POLYMERIZATION
	80		9		80 seconds		20 minuts
	50		9		120 seconds		2 hours
	20		0		1 hour		12 hours

 

APPLICATION NOTES

	Measure		Nr. Pz. Per kg
	1/8 “		12500
	1/4 “		7000
	3/8 “		6660
	1/2 “		3350
	3/4 “		2800
	1 “		2500

 

SAFETY
TENFIL TF200 should be handled like other Lineplus PTFE resin. When PTFE resin are heated to temperatures above 350°C, a small amount of decomposition products, which may be harmful, are given off.
Avoid inhalation of these fumes. Ovens and process equipment should be vented and adequate ventilation provided in the working area. For further information refer to the Lineplus PTFE material safety data sheet. STORAGE AND STABILITY
TENFIL TF200 is stable for one year if stored in original unopened container at temperatures between +4°C - +35°C
(39,2°F – 95°F).

PACKAGING
Kg 10 - Wide-mouthed bucket with lid.