SC 1400
An innovative material to replace asbestos based seals and conventional PTFE products.
Features
- Superior chemical resistance
- Excellent resistance to deformation
- No ageing
- High compressibility
- Superior sealability for a wide range of P and T
- No water absorption
- Non-flammable
- Easy maintenance (assembling/disassembling)
- Complies with FDA specifications
- Certified by BAM (200°C, 25 bar)
- In compliance with TA-Luft VDI 2240
Uses Chemical and Petrochemical Industry
- Heat exchangers
- Piping
- Flanged fittings
- Valves
- Pumps
- Flat seals
- Centrifuges
| Property | Unit | Method | Value |
| Pressure, max | bar | / | 85 |
| Temperature, min | °C | / | -200 |
| Temperature, max | °C | / | +260 |
| P x T, max | bar x °C | / | 12.000 |
| Density | g/cm3 | ASTM D792 | 2,20 |
| Compression Modulus Room Temperature - 20 Mpa KSW | % | DIN 28090-2 | 8 |
| Modulo di Compressione 150°C - 20 Mpa - 16 ore WSW | % | DIN 28090-2 | 3 |
| Creep Relaxation Room Temperature - 1 Mpa KRW | % | DIN 28090-2 | 15 |
| Compression Modulus 150°C - 20 Mpa - 16 hours WSW | % | DIN 28090-2 | 4 |
| Recovery | mm | DIN 28090-2 | 0,07 |
| Leakage Rate with nitrogen N2, 40bar, 32 N/mm2 | mg/s/m | DIN 28090-2 | < 0,01 |
| Leakage Rate with nitrogen N2, 40bar, 32 N/mm2 | cm3 /min | DIN 3535 | 0,01 |
| Compression Creep 150°C - 30 N/mm2 | N/mm2 | DIN 52913 | 16,5 |
| Compression Creep 175°C - 50 N/mm2 | N/mm2 | DIN 52913 | 29 |
French (FR) 
English (UK)